Pages

Monday, March 31, 2014

Signs of Life

I haven't fallen off the face of the Earth....  I'm still here and hobbling around. Its a bit troublesome coming up with some weaving for you when I'm so slow now and this is a weaving focused blog!  Mind you in time, you will be learning all about knee replacements and the road to recovery later this year  :)

With longer days, more sunshine and things starting to grow again (well, here at least!) our attention has been diverted by annual events such as taxes,  and some early spring clean up around the house. With my wonky knee, I'm close to useless outside and so have to learn to 'not see' stuff outside that needs doing.  (Hard for my personality type to do!)



All in our garden at present. (including the weeds :)


Last fall we debated what to do with our car and its elderly age. We decided to leave it till spring. Its a 2001 Toyota Sienna and has over 260,000 km's on the engine. It's been a totally reliable car, no major issues, good on gas and room for the stuff and dog kennel we  travel with.


The car started making noises late fall and earlier this month it started a front end wobble so we suspected the wheel bearings. The trouble is, the repair would cost more than the vehicle is worth and we'd still have an older car with other expensive issues starting. We were grateful it lasted the winter months at the least!   So Bruce started looking around at our options. We had to have a similar seat height arrangement due to my joint issues (my hips can not be lower than the knees so many sedans are out). We need room for Calli and that means a kennel.  She is not a "just jump in the back" kind of dog. She gets all silly and wants to climb around, bark at other cars and stuff going by.  No, she goes in a kennel and it also keeps all the associated dog mess in one spot too.

Here she is with her fresh new spring hair cut. Don't let that innocent look fool you!

On  March 18th, Bruce found this beauty here locally:


A 2010 Hyundai Santa Fe LE, with low mileage, just brought in as a trade in the day before.   On the 19th, it was ours!  That's our old Sienna in behind the new vehicle. The Santa Fe is higher and although narrower than the Sienna, its roomier inside.   Its very nice to drive too.  So no more over heated me when we drive to the Okanagan. We have AC again now.   So pardon my excitement at a new car. It doesn't happen around here very often and the last time was fourteen years ago. We literally wore the last one out. She was destined to be recycled for parts as there was no value to selling her again.  Sad huh? 
I must admit that it feels good to have a new ride.  We signed the papers on my birthday and Bruce tried to say it was my birthday present, but I straightened him out on that point!

I have been able to spend some time in the studio but once again I have been setting things aside for more downsizing. I will be setting up a separate sale page and advertising items for sale on it. Watch for it very soon just under the Thrums banner and along with the other page tabs.  There will be books, various magazines, some yarn, and small equipment as I photograph and set them up.   Its now clear that living in a two storey house with a flight of stairs to the main floor is not going to work all that well (plus the acreage) and so we are voluntarily downsizing and getting ready to put the house on the market next year in 2015. Its just too much to sell and move now with an operation coming at any time.  So we will be having garage sales this summer and paring down.  (That's the plan....)

After wading through all this personal stuff, if you are still with me, you deserve some weaving content now!   In my last post you read all about the slow start to this current silk shawl project. The beaming was an education in patience for both myself and my helper Bruce.

I'm using a fine 30/2 Italian tussah silk that I bought from the Silk Tree at Diana Sanderson's Silk Weaving Studio at Granville Island. (Yes, those are three separate links for three locations. Check them out if you have time to browse. )  The sett is 36 ends per inch and I used a 12 dent reed, with three ends per dent. No problems with the threading, none either with the sleying. So nice when it all works out like that!  Its a twelve shaft, twelve treadle twill pattern that I received from my friend Gudrun. She found the draft at Handweaving.net from an old German manuscript.  Gudrun modified it and so did I a bit to suit my needs.  I had the information, even a copy of the draft she sent me but in the transfer and set up of Fiberworks between three computers being set up and decommissioned, its gone missing!  All I have is the single sheet hardcopy paper variety sitting on my desk. It will have to be re-entered all over again when time allows.  Its a combination of point twill and network twill in both the threading *and* the treadling.   Where you have point twill and treadle point twill, you get stars and diamonds, and where there is network threading you get this interesting design. Network on network is another look altogether...   Sounds confusing huh?   You can see the point twill with network sections in the draft below:  
 
 

The warp was planned for two shawls and to economize on warp, I laced it on and got under way using the two stick method. I used a fine 55% silk / 45% yak blend that I purchased from Treenway Silks when they were still on Saltspring Island.  Its a lovely soft grey beige and works so nicely with other colours. The tussah is a mellow gold tone and the two looked great together. This project cleaned me out so I did place an order for more silk yak blend from the new Treenway.  Great service and quick delivery.

I wove a border using a half run of one through to twelve for a few repeats, then I moved into some point twill runs of one to twelve and back down to one again.  Then I shifted into the network twill treadling which is a series of twill progressions. The border and network section measured roughly twenty eight inches. I wove  point twill runs again for roughly thirty two inches, back into the network twill again and shifted into a short run of point twill for the border and finally with  half runs of one through to twelve to complete  the eighty five inches for the shawl.  The shawl design is in three sections with a slightly larger centre section. I pictured that on the wearer's back and the two other reversed sections draped in front.   Clear as mud?   Here's a picture (please click on it to enlarge and see better):


Here the shawl is folded in half on the ironing board. At the fringe end you can see the border section and then the network twill portion and then near the iron, half of the centre section of stars and diamonds.  I was experimenting when I wove it this way. A concept project.  A calculated risk I know but if it works out, it will be great!.  At the very least, it would make an amazing table runner for a large dining room table. (Sorry the picture is so yellow... not sure what happened with that!)

It looked a bit 'blah' so I added some sparkle:


I had a box of beads in a tricolour arrangement that picked up the grey beige, cream and the centre bead is more amber in tone. Just small groupings between the fringe. Adds a little something but doesn't over power. Due to fine silks being used, its not a heavy shawl at all and somehow the beading needed to reflect that.  (If it does end up being a table runner, they can be easily removed.) 

Gentle hand wash in warm sudsy water, with a steady squeezing to help threads to shift about. Three ends per dent can give you some reed marks for the first wash or two.   Two rinse water changes and much  squeezing. I hung it over a rod to dry overnight.  Then my gut told me to go back and give it a pressing while still damp to remove crease lines!  I'm glad I did as the next day, I gave it a hard pressing and it was smooth, smooth, smooth! Any lines or creases can seem to sett if left to dry first.

It measures nineteen inches by eighty inches plus a six inch fringe. I lost an inch in width and four inches in length *more* than I had planned on for shrinkage! The tussah silk wasn't finished being annoying it seems. I have made notes in my records to allow greater shrinkage than 10%, and also about the cling problem!  I still have some left for future projects, so forewarned is best!

So, hopefully my grand experiment works out okay? What do you think.....

The network section on the left hand shoulder


The center section

The border and beads.


Bruce says that from a distance it looks a bit like snake skin.  There are shifting patterns all over it so it plays with the eye! Its light and neutral in tone, but the pattern is definitely there but not overpowering.   Its going into the Etsy store and so we'll see what happens from there.

The second shawl is underway....and it will be a slow time of it again.  Made some changes to my treadling plan and also my weft yarn. I'm using hand dyed silk / cotton blend in a plum tone, also from Treenway Silks from my stash. 

I hope you are all enjoying the extra daylight  and looking forward to more spring-like weather.... and for those of you with snowbanks and blizzards,  want to buy our property on Vancouver Island?


Friday, March 14, 2014

Threads Behaving Badly!

Well, the snow is gone... melted away in the rain and the early spring flowers are making an effort to resume growing. We have crocus and snowdrops. The greenest things in the garden are the weeds of course.  I've seen hummingbirds, swans and geese all back at the Somenos Marsh.  I think I even saw a red wing black bird today as well.

For my readers stuck in snow drifts, take heart... Spring is coming for you too!

I saw my surgeon this past Monday and its now official that my left knee replacement will be first up and right hip will be second some months later. So the knee surgery will be approximately  late summer or fall.  Now if my knee can hold out for some treadling until then, I'll be a happy camper!

We took a couple of days to go and visit my Dad who is *still* in hospital. That's three months in there for him now but he does seem to be slowly making small improvements now.


We had an upfront view of things on the return trip! This is a view up a cloudy Howe Sound from Horseshoe Bay. We're cosy and warm in the car and the ferry turned left soon after this was taken and headed across the Strait to the Island.


Another change for me is a new computer and I have been  learning the ropes for a new operating system on my new Mac Air.  Its amazingly thin and light weight on the lap, which is good for my cranky knee. No moving parts and so no overheating issues too. While I still have alot to learn,  I am enjoying the change! I bought a visual guide book to assist me.  I still have my old Dell laptop for the PC stuff and a ton of my pictures stored there! So this blog post is a joint venture between Apple and Dell. I'm happy they 'hand-shake' well!


I  have my priorities straight as the first program loaded was Fiberworks- PCW! I have a new manual to read up on that too now... A big thank you to Bob at Fiberworks for his help!



There has been some weaving going on here.  The Woolhouse Tools loom is all dressed up with my odds and ends coloured 8/2 cotton towels as shown in the last blog post. The loom has now been additionally advertised up and down the Island, Sunshine Coast and Vancouver and Kelowna area now.

Meanwhile on the Louet Spring.... is Italian Silk (from Diane Sanderson's Silk Weaving Studio) in a soft gold for two shawls. I bought it a few years ago when we were there visiting on Granville Island.  I'm using a 12 shaft 12 treadle draft sent to me by Gudrun.


Looks nice here doesn't it? Well, trust me,  its nothing but trouble just waiting to happen!   I set it up on the back beam and placed the ends into the built in raddle, sett for 36 epi. 
I enlisted Bruce's help with winding on and its just as well I did. We had a nice long afternoon together "inch-worming" the warp on.... literally inch by inch!


The fuzzies on this silk grabbed onto each other. I call it halo'ing. Bruce had to maintain tension and clear the raddle slots and I wound for an inch or two and then used a needle to work apart the warp ends, then pick off fuzzies for all eight yards of this warp! We had a great chat, sang some songs and had more than a few laughs along the way!
Here I am... picking away!


So finally I got the weaving under way and here's the first edge of the first shawl.



The weft is a silk yak blend in a beautiful silvery beige. Its the equivalent of a 30/2 for size and weight.  I will go into more detail in my next post on draft and project details. I plan to cut off the first shawl and finish it while weaving the second. I'm trying a special effect with the treadling plan and hopefully it will turn out as I planned.

This will be my last full twelve shaft draft and twelve treadle until after my surgery is done and I'm stronger again. The weight of the shafts and treadles is too much for me now.  So there will be more eight shaft projects (and perhaps even less?)  in the near future while the knee holds out.... or is that hold on?