Seeking a New Home

For Sale: 12 shaft / 14 treadle Louet Spring 90cm (35 1/2 ”) Loom

This small but mighty countermarch loom is a real little workhorse ! I have woven everything  but rugs on this loom; from light laces to shawls, scarves, towels and table linens. You can use just 2 shafts, 4 or 8 or more and it will grow with your weaving experience.

Its small floor 'foot print’ makes it ideal for smaller homes and spaces, and it does everything the larger floor looms do.  Louet’s beautiful craftsmanship and well thought out designs makes for easy warping. It features a floating breast beam for the same tension every time you advance the warp.  CD byJane Stafford comes along as a bonus on how to beam a warp. 

There is a generous shed and easy action on the treadles. Rear attached treadles and all cords run over pulleys and so is easy on your joints . I was able to weave right up to joint replacement surgery and again at 4-5 weeks post op. 

Tie ups are straightforward but the loom can be carefully lifted up onto crates and then sit to do the tie up. The photo above shows my current and last shawl project nearly completed, so it's all tied up for a lovely 8 shaft huck lace and I will leave this tie up in place and provide a copy of the draft. Wind and beam a warp, and weave right away.   

Its time to sell due to health issues.   Visit  https://www.ravelry.com/projects/Weever   Any project here that is 12 shafts or less was woven on this lovely loom.  

This package includes:

• Loom, new in October 2008, with 12 shafts and 14 treadles   (current value to purchase new: $10,500.00)
• Over 1200 heddles, and scads of texsolv tie up cords.
• Woolhouse Tools commuter bench (new 1997), adjustable height, seat can slide to reach treadles or be pinned in place. Made from hand select birch and Danish oil finish. (value: $450.00)
• Louet made second warp beam (not attached and needs a small modification to fit)  (value: $850+  )
• 5 reeds: 39” 6 dent, 36” 8 dent, 36” 10 dent, 36” 12 dent, & 36” 15 dent  (value: $170.00 each x 5)  
• 3D printed covers for the built in raddle  (value: $25.00)
• 3D printed slip covers for treadle screw covers (value: $38.00)
• A set of “Helping Hands” by Lofty Fibers (3D printed) warping assist brackets (value: $48.00)
• Pair of original lease sticks
• A set of 16 Louet warping sticks (value: $36.00)
• A 12” Leclerc shuttle and 3 bobbins (value: $55.00)
• Leclerc reed hook, and a reed sley hook
• 14 yard warping board, that comes apart for storage (value: $150.00)
• Original manuals and paperwork

Its a complete weaving package and all you need to add is the yarn!

Loom is pick up only in Campbell River, BC, Canada. Dimensions can be provided .    Please contact me if you have any questions or would like to view by prior arrangement..

Asking: $4800.00 for all. Susan  / thrumstextiles@gmail.com 

 Now if you have trouble getting down to do a tie up:  I recommend two people to do the lift and to set it back down. Then I would sit on a low stool and do the tie up cords. I print up the tie up square and isolate the row I'm working on.    (do a quick one tie to secure  the treadles that won't be used so they don't flop around when the loom is being shifted up or down) I have never left tie up cords in place and only used enough for the tie up in play. Spare cords hanging confuse the view and can tangle up and cause issues. Usually when changing the tie up to a new draft, some cords will be in the right place already and only a few need changing. 

Helping Hands being used on the Spring

Blog post with the process

I've approx 25 inches more to weave on the last project.... and saying good bye with each pick.  🥹 

Write me if you have any questions.....