Thursday, April 13, 2017


 Lusekofte What's that?   Well, its pronounced "Loose-coff-ta" or so the  online audio Norwegian translator told me.   If I'm wrong about that, please let me know ....  They also said it means cardigan in Norwegian.  I've also seen the term Mariusgenser and also Selburose So why are we discussing foreign words and meanings?  Because I saw the most amazing Nordic sweater in a movie one night and I was driven to learn more about them!   

You may have seen them on skiers and other people enjoying a frosty winter.  Stunning knit sweaters, some with sliver clasp closures, some with zippers, some are pullovers and some are cardigan style. All speak to the craftsmanship of the knitters and their designers.  They also indicate a proud tradition among Scandinavian countries.

Now, despite my mother's best efforts, I am not a knitter. Oh, I play at simple patterns but all the fun comes to an end when I drop a stitch.   I am a weaver and so this is my medium to express creativity.  So with a quickly jotted down pattern and colour arrangement on a scrap of paper, I went looking on line and found these two images. They are close but not the stunning sweater I saw (and sadly I can't even recall the movie's name now)

(I'm not crazy about the orange or green accents, so ignore those!)

This one is lovely but not enough red.

Eventually I rediscovered an old draft I found years ago at  A twelve shaft Gbrochene hind und under that I modified to fit my shawl and concept.    So far, so good.

I went through my tencel stash and found the black, and undyed tencel which is just off a pure white. I had four reds to choose from: fuchsia , ruby, burgundy and a newer colour called new red.  Fuchsia was too pink, burgundy too plumy, and I found the new red unappealing.   Ruby conjures up that deep gem stone richness. This ruby red has a slight orange undertone when seen against other reds, but paired with the black and white, it has a warmth to the bright tone.  It was perfect!

So I worked out my project details and started to wind my 700+/- ends on the warping mill and soon they were hanging about waiting their turn on the loom.

Then after the table runners had had their debut, this warp was beamed and during threading I discovered that was short a few ends (oops). Even allowing for two black floating selvedges, I still needed two more blacks and two more reds.  Not entirely sure how that happened but it made for some interesting  stretch breaks.  Rolling up the paper, unrolling canisters, weave and then do it all again.

Below is one full repeat of the pattern before starting again. I used a 15 inch Schacht end delivery shuttle with great reach across and bobbins hold a good portion of weft yarn.

....and here's a six inch ruler to give some perspective of size.

In this picture (please enlarge) and you'll see the intricate pattern work that reminds of the pattern in the sweaters.

The weaving went along just fine and after eleven repeats, plus a portion to balance the pattern, it was done.  The wet finishing was done in the bathtub allow some wriggle room. I generally keep the fringe off to one quiet corner and out of any agitation.   After a good rinsing, I spun it out in the washing machine.   I laid it to dry over a towel on a drying rack.

The next day I brought out the steam press and warmed it up.  It won't do the entire job but it would get 95% of it pressed and my arthritic hands would be very grateful.  The only spot I have where I can use it is on the kitchen counter, which got a thorough cleaning beforehand!

It takes a big of planning and finagling, but you can get a long shawl in behind and onto the pad, and not burn your fingers! Its the top part that heats up. It would be easier if it opened up more vertically.

I had it laid over the left hand side and gently pull it across and onto the pad.   I couldn't do near the fringes and you inevitably get a pressing lines.

So out came the ironing board and my handy T-Fal steam iron.  This flattened and produced the deep sheen I was looking for and I'm able to work the iron from the centre to the edges and generally improve the over all appearance.  I hand sewed on my label and trimmed up the fringe tassels.

Madge wears it well!

The finished dimensions are 22 inches by 86 inches; the fringe is finer and 8 inches long

Here's a close up of the pattern area, after wet finishing and pressing. Its much clearer now.

....and don't ask me why, but I wove two of them! so this is the other one hanging around.

I'm back weaving yet another shawl but this one is a special commission and for now, secret!


Theresa said...

Stunning, just stunning!

Peg Cherre said...

As always, your work is absolutely stunning and inspiring. Although I retain harness envy, I've done enough exploration to know that I don't really want to weave on a loom with more than 8 shafts (possible exception of a countermarche), so I modify to obtain complex twills, which always call to me.

Thanks for always sharing your beauty!

Cindie said...

So beautiful Susan. And what a great place to find inspiration.

Louisa said...

Brilliant! You captured the essence of the sweater's patterning and totally made it your own. You are amazing, woman!

Dianne said...

Norwegian, pfftt! I thought it was your New Zealand heritage showing when I saw the colours. xx

Unknown said...

This is such a wonderful project! From the inspiration to the finished shawl and all the steps inbetween, just superb!