Pages

Thursday, September 3, 2015

The continuing story of yet more Changes

Its been a strange summer. Long, very hot, and very dry.   We had no rain for 120 days and then this past week or so we have steady downpours, and its been downright cold.   Fall seems to have arrived overnight.

We're happy to have the forest fire risk diminish and more water in the creeks again!

I have been puttering around and not really pushing myself too hard. My knee is very sore and so some days it simply hurts to stand, let alone weave.  That has given me time to look around my studio and decide what direction I'm going to lean.  If you read my previous post, then you know that I have been through lots of changes before.

I have wound two scarf warps in tencel for the Louet Spring loom.   I plan to warp up this one (below) ahead of my coming surgery so its there on the loom to catch my eye and encourage me along with my physiotherapy.





I recently learned to do colour gradations using the Mac version of Fiberworks and I must say they sure do transition nicely. (PC users will get this feature in the next program upgrade)  I've used black, eggplant and red purple here.   It may be some time before I'm able to treadle this loom so the colours are my carrot!

The loom that will be easier to use first, when the time is right, will be the Megado and I have wound a twelve yard warp of simple natural 8/2 cotton and it will be ready to weave towel yardage. It has just the one treadle and I can use my good leg. The computer will do the bulk of the work.  I've got some attractive sixteen shaft drafts cued up and it will be fun to watch the patterns grow.  I'll use coloured cottons and cottolin's as weft.  I'll be beaming that warp later on today.



The fly shuttle arrived from Louet in Holland and as usual it was extremely well boxed and presented.  You basically take it out and bolt it on. Very little to do other than set the length of the pull cord.   I had to take the beater bump blocks off and replace them with new larger ones so the right hand shuttle box doesn't clash with the  computer interface.   That was four screws. 




Here they are installed on the loom. There's no reed in place or front breast beam as I'm preparing to beam a warp.  We turned the loom slightly so the boxes don't face any windows! I don't want any damage done to a twenty five hundred dollar patio door! I also placed red and green ribbons on the ends to catch the eye as you move in the room as my "port and starboard markers".

There's a problem though. The right hand flyshuttle box slides beautifully.... the left side, not so much.  Its stiff and hard to move. I've been emailing to and fro with Louet on this issue.  If a solution isn't forth coming soon, then I will take them off and use it by hand.  I'm sure it will be resolved eventually.  Edit: things seem to have been resolved nicely.....   Susan August 4th 2015.




The Louet  end delivery fly shuttle is huge!  Its fifteen inches long and heavy, with rollers underneath. It came with wooden pirns.  I was additionally motivated to move the loom when I felt that bruiser and realized all the tips I had received about not pointing the fly boxes at glass were good ones! I guess keeping your feet out of the way too would be a another. 

I have some (lighter)  AVL shuttles that I'll also try out in time as well.  I think there will be a learning curve and a routine to practise but hopefully it will speed things up.  It will be as fast as my one good leg can go!    So fun and games to come there....

Another change is that I decided to sell the Louet Jane table loom and stand as it was not being used.  Its been to one workshop and had one other warp on it. That's it since 2008.  I find table looms too slow and so tend to use the floor looms instead.   It sold right away and it was delivered to its new home today.


So with the proceeds of this sale I have placed a yarn order with Brassards to fill out my 8/2 cotton selections, some more 9/2 linen and cotton seine cord and wools.    Why seine cord and wools?  Because with some of the table loom proceeds, I bought this:


A gently used (only two owners) Leclerc 45" Tissart loom (circa 1967). It was picked up today (in pieces of course). Here's one all set up:


I'm taking down my warping board centre which isn't being used any longer since I bought the warping mill. It would be a very long time before I could stand to use one again anyhow. Its been put away and there is a nice sized space next to wall where the loom will go.  The new more open look to the studio will still be there and I can work seated at learning samplers on the loom.  I'll try to get a warp on her soon, but I have to see what state she's in and if she needs new bits and pieces first. Leclerc doesn't make them any longer but they still have parts.   Her name will be Gudrun, after my friend.
She had one too and so has inspired me to get busy following my heart as I always wanted to give tapestry a try.  If its not for me, then she can be sold and moved on.  I won't lose anything, including money, for the effort!  I will start with the basics and follow an online workshop and also review my notes I have from a tapestry class that I took with Gudrun.  I'll be a newbie again!

Gudrun's Tissart

So a lot of changes, some small, some big and some new directions.   The driving force behind much of this is coming to terms with the reality of my joint issues. I *will* be able to  floor loom weave again  but I'm looking for easier options for my health.  They can replace the joints but the Arthritis Lupus will never go away.  So, time to adapt, make changes... and move on. 

I hope to get another post done  before my surgery on September 28th.  Any posts after that won't be weaving related but I'm sure you'll understand.    I will admit to being very nervous and I hear its more painful than a hip .... and that was bad enough!  So getting things in order in the studio will be my distraction during the coming days.  Night time though,  insomnia has my Mind in full play!  I reason with myself that it will result in a better, more mobile me in time, but the Mind is having none of that argument! 



4 comments:

Cindie said...

That tencel warp on the mill is a beauty.

I'll be thinking of you come the end of the month - I wish you the best with a quick recovery from the surgery and following therapy.

barbara said...

Hi Susan - what an interesting post; I admire how you are looking ahead and what you needs might be in weaving ...... a lot of thought has gone into this. Beautiful color combinations on the scarf warp - they will be beautiful! Good luck on the 28th; my thoughts and good wishes will be with you. I have heard that knee surgery is a little more painful then hip surgery ....... nothing you can't handle. My only two pieces of advice are: (a) "don't let the pain get ahead of you". This is not the time to show how strong you can be. (b)"keep an accurate record of when you take your medication, including over the counter drugs (if they are suggested to you)"; this is important! Also, last thing I have to say is; I wished I had come home from my knee replacement with a written schedule of when I was given what medications in the hospital ...... because I was in such a drug induced state ........ I had no idea when I was given what! That, for me would have been helpful to know. Best of luck and you will be just fine. I will be sending lots of "East Coast Hugs" your way.
Weaverly yours ....... Barbara

karensspinzen said...

Oh, the colors! As always, I love your color choices!
Doesn't it feel good to get all your ducks in a row? I'm a check list kind of girl. I guess it gives me a feeling of control and peace to be able to check things off either to complete them or to prepare for what comes next.

ann marie said...

My goodness! You have been busy! Your color draft is amazing!!! Will have to play with my Fiberworks more! So much you can do with it! And I LOVE the tapestry loom! I am fascinated with this type of weaving and hope to someday tackle it! So much to learn, so little time!!!
Will be thinking of you as you head into, go thru and recover from you surgery! Blessings! Speedy recovery! Ann Marie