Pages

Monday, July 15, 2019

Irons in the Fire

I  like a clean orderly studio.  But its far from that right now...


I simply have too much on the go and its difficult to know where to start or what to finish.   I finally got the second diamond shawl woven off.    I even wove off  seven or eight yards of towels on the Megado!  I struggled with the loom,  the brake, and found myself having to tighten nuts and bolts every half a towel or so. Something was off and I couldn't put my finger on the issue.  The rolled up raw cloth is sitting on the office shredder waiting for the desk to be clear so I can dig out the serger and secure the edges before wet finishing...

finally fixed and ready to warp up again
...doesn't look like 8 yards does it?
So with two looms coming empty I needed to start winding warps. I planned three or four actually and started winding. This meant the desk was being used for the warping mill and so the fringe twisting on the shawl had to wait.

its half way done at least...
more warps to wind, wheels to spin...
Another day saw a parcel arrive from Leclerc and new inserted eye heddles arrived for the Tissart tapestry loom and I spent an afternoon finagling the parts off the loom, cleaning them up and installing the new heddles.  So that's done..... but I also have two new apron cloths waiting to go on that loom so I'm not entirely finished with the Tissart. Not to mention actually getting the loom set up with a warp yet...
the white cloths patiently waiting to be installed...
Another day, another diversion. I enjoyed time spinning on the Rose wheel and working my way across a rainbow fleece. It must remain open and accessible so you can peel away the next section to spin, in order to get the rainbow effect. So that sits on top of the printer and the two wheels are by the door so I can take them outside.

I had a warp ready to be wound on to the Spring and another ready to go on the Megado.  Hubby came in yesterday morning to assist me and we got the longer eight yard cotton warp wound onto the Spring with no issues.  Love this little loom!



The Megado has a narrow warp of tencel waiting and I told him this won't take long..... and before we knew it  three hours had gone by and we were exhausted!  I casually mentioned the issue I was having with the loom and then he noticed some chaffing on the wood.  Long story short, it seems some carriage bolts were installed in the wrong locations and while the loom worked, it wasn't happy.  We identified the longer bolts and where they needed to go and thought we could take them out sequentially but its not that simple as we quickly discovered.

We end up removing the warp from the raddle, and then dismantling the back end of the loom, and then rebuilding it again.  It took some effort and patience but its all done now and fixed.  I even ended the day with the warp back being spread in the raddle again.    Most of the work needed to be done from floor level and finessing washers into tight spaces and lining up wooden parts, so it really needed both people working on the same page and cooperating.    We got it all done and stayed friends at the end of it all.  
warp being spread in the raddle again
So I have been busy and some might think a bit too busy (me included!) but stuff is happening and moving along.... if slowly!  I just pick a task and see how far I get with it but I have two active looms, and a third  nearly so, which means I have more to choose from !

Oh yeah.... and its summer with other outdoor distractions too.




2 comments:

Peg Cherre said...

What is that last flower - the one that's purple with 5 petals? Is it a clematis?

Susan said...

Hi Peg.... yes, that's a clematis. S.