This sure is a busy time of year! Between Christmas shopping, regular life and errands... then throw indoor renovations into the mix and there hasn't been as much time for weaving as I would like. My big loom Emmatrude has a 9.5 yard towels project that was part of my experiment to try new methods of warping my loom. I tried to simulate the Louet method and after a fashion I did manage to get the warp on and beamed. Then the second warp beam placement raised the level of the warp at the back by 3 inches. Not ideal, but I have been weaving this warp off slowly. The threads are running elevated from the back and at the heddles the threads are touching the top of the heddle eye. While I get a shed, it's not the best to work with. There is a further complication in that the tie up assist cords appear to be out of sync and so I had to raise the beater bar assembly to keep a smooth bottom edge to throw the shuttle on. Add a narrower shed and then top threads at varying heights and it made for a slow slog.What this means is when this warp is done and off the loom, there will need to be some adjustments made to my loom before another project can go on. For the 20+ tie up assist, it means raising the treadles to their optimum height and then placing weights on them to hold them securely in place. Then, at the back of the loom, all cords, one by one, must be pulled and tugged till all slack is gone and then pegged at the 'sweet spot'. Then all the sweet spots must be marked with a tie of non slippery yarn. I used red 2/8 cotton last time so it will be interesting to see how much discrepancy there will be this time. They say Texsolv doesn't stretch, but I have found with constant use and tension that it will 'ease' by as much as a centimetre. This can be enough to cause some problems at the front end! So in short, its time to tweak and fine tune. It's all part of knowing your loom well.
Speaking of knowing your loom well, I have decided to put the sectional back on and revert to my method of warping on this loom. I would have to practically rebuild my loom to take the second warp beam off to get the warp at the right level and I have decided I'd just rather not.
So it will be part of the 'big tweak' as well.
In the mean time, I'm weaving away, albeit a lot slower than I would like. Let's take a look at the various colours and combination so far. I'll post the finished results sometime down the road, most likely in January.
So the warp is 2/10 mercerized cotton, sett 28 epi and is a simple two block twill. I'm weaving to a towel length of 34 inches with decorative bands top and bottom. Above is white weft and decorative band. It really cuts the colours intensity! Below is the steel grey and I really like it.
More of the grey and you can see the optical diamonds the pattern creates. Neat!
Below I used the red as my main weft and while it looks okay, I'm not so keen on it. I wanted to have one towel with each colour, then repeat my favourites and possibly expand on the size of the twill blocks.
So, my favourite is the black! It really makes the colour *POP* and looks elegant. The inspiration for these towels was the new modern appliances that feature stainless steel and black exteriors. I thought they would different colour wise at sales and be a hit. ( Also being mercerized, they have a nice sheen).
So as part of our coming kitchen reno in January, it seems these fancy shmancie appliances will be coming here to our place!
Gosh darn, these look like they are going to be mine.... well, most of them!
